Several types of communications can be fitted to the receiver unit, from a conventional auto-dialler to a COMGSM dialler.  The COMGSM dialler facility will give the target recipients details of the alarming equipment. A conventional auto-dialler and COMGSM dialler can be connected to the same receiver.

If simpler communications are required a speech dialler unit can be fitted to the receiver.

Power for the speech dialler and alarm trigger is obtained from the receiver.  This ensures that, even during a mains power cut, the equipment will still detect an alarm condition and dial out.

The Speech Dialler Unit accepts one input from the receiver, which causes corresponding messages (A) to be sent out to pre-arranged telephone numbers.

 

Telephone Numbers: maximum of four different telephone numbers

Messages: . The phrase can be up to 40 seconds long

 

Acknowledgement : This is achieved by pressing the number [8] on their telephone keypad, this prevents further calls being initiated.

The COMGSM Dialler allows the user to allocate a mixture of up to 5 mobiles or land lines to be contacted in the event of an alarm. Targeted personnel for a particular piece of equipment will be contacted in the event of an alarm. The targeted text message or voice message will contain the alarming transmitter unit number and a generic description. E-mail address can also be used which will send details of the alarm call and acknowledger for record purposes. No telephone line is required so installation of this device can be carried out in remote locations.

 

Specification

Number of Contacts

5 Telephone Numbers either land or mobile selected by customer.

 

Type of Message

Synthesised voice and Text messages.

 

Alarm Messages

The synthesised voice message is sent to land lines.  This contains a generic message and the transmitter unit number.  A text message will be sent to mobile phones, this will contain a generic message and the transmitter unit number.

 

Alarm Telephone Sequence

Each alarm /data transmitter can have its own unique call sequence using the 5 numbers that are available.  This allows only target personnel to be alerted when their alarm/data transmitter is alarming.

 

Acknowledgement Procedure

To acknowledge an alarm a mobile phone can only be used.  When an alarm message is received at the mobile phone, the call is replied with a message to the COMGSM unit telephone number with the unit number alarming.  If this is successful no more calls will be phoned and a second message will be received with the mobile number of the person who acknowledged the call. This acknowledgement message will go to all mobile telephone numbers that have been set up in the call sequence for this alarm/data transmitter.

 

Software

Easy to use software allows the customer to set up contact numbers and the generic message.

 

The call sequence for each transmitter is also easily setup using this software.