ALARMS
Once an alarm is
generated from an AS200TX transmitter the
AS200RX will display and sound an alarm.
The display will
show the unit number of the transmitter, I/P and
time & date it was received. The audible alarm
can be muted but a user key-fob must be used to
clear the alarm from the screen.
ALARM / LOG DISPLAY
The receiver alarm
log will store up to 999 alarm and
acknowledgement details. Each alarm and
acknowledgement is time & date stamped and can
be downloaded to a computer to create an audit
trail.
ALARM LOG
SOFTWARE
Download and
view software enables the creation of an
audit trail from the alarm and
acknowledgement event log. The receiver
will store up to 999 alarm events and
can be downloaded, stored and viewed at
any time.
ACKNOWLEDGEMENT KEY-FOBS
Up to four individually named
user key-fobs are available. Key-fob user 1 is designated
the administrators key-fob. The administrators key-fob can
add and remove transmitters from the system and clear the
alarm log. The remaining user key-fobs will only acknowledge
alarms.
COMMUNICATIONS
Selectable communications are
available including conventional auto-dialler, GSM dialler
and web enabled facility. The GSM or web enabled facility
can be used in conjunction with a conventional auto dialler.
DATA LOGGING &
MONITORING
Data logging and
monitoring from AS200TX transmitters is possible
with the AS200RX receiver when used in conjunction
with a computer and relevant software.
The data collected for
each transmitter is as follows :- Serial Number,
Unit Number, Temperature I/P1, Temperature I/P2,
High Alarm, Low Alarm and Delay Time.
The
transmitter will update the computer every 15 minutes with the data.
This increases to every 10 minutes when the
transmitter is in an alarm condition. Faster data
collection available on request.
Data capture software
enables the display of variables collected. A range
of software is available to cover clients
requirements.